Eagle 320 Manuale Utente Scaricare il pdf (Pagina 21)

Page 19 of 32 P/N 595176-01 Rev. C 1/11

7. ZOOM Feature – To magnify the image in the display screen, the EAGLE

IMAGER 320 Thermal has two (2) ZOOM modes, two times (2 X) and four

times (4X). Press and hold the left control button for 1/2 second to toggle

through the ZOOM modes. The camera will always power up in the normal

or 1X mode. See FIGURE 15.

See the TEMPERATURE INDICATORS section of this instruction.

See the VIDEO TRANSMITTER section of this instruction.

WARNING

NEVER BECOME WHOLLY DEPENDENT ON THE EAGLE IMAGER 320

THERMAL CAMERA FOR PERSONAL NAVIGATION. IN ADDITION, IT IS

NOT A NIGHT VISION CAMERA. ALWAYS MAINTAIN AWARENESS OF

LOCATION AND ESCAPE ROUTES WHEN USING THIS DEVICE. FAILURE

TO DO SO MAY RESULT IN INJURY OR DEATH.

8. To properly turn OFF the EAGLE IMAGER 320 Thermal Camera, press the

RIGHT Control Button and hold until the display screen turns off.

The next time the camera is turned ON, it will begin operating in whatever

display mode was active when the camera was properly turned OFF. The

optional transmitter will also return to its last active state.

If the camera is turned off by removing the battery, the next time it is turned

ON, it will still begin operating in whatever display mode was active when

the camera was properly turned OFF, regardless of how it was set when

the battery was removed.

The ZOOM will always return to 1X display at start up.

If the EAGLE IMAGER 320 Thermal Camera does not perform as de-

scribed, contact an authorized SCOTT Health and Safety service center

for assistance.

FIGURE 15

ZOOM LEVEL

INDICATOR

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Nessun commento

Eagle 320 Manuale Utente Pagina 21