
Page 13 of 32 P/N 595176-01 Rev. C 1/11
POSITIONING THE HANDLE
OF THE EAGLE IMAGER 320 THERMAL CAMERA
The handle on the EAGLE IMAGER 320 Thermal Camera can be adjusted to
one of three positions for use. Verify that the lock wheel at the top of the handle
is turned fully counterclockwise until it stops. Adjust the handle as follows:
1. In the TOP position, the camera can be easily carried for viewing. The
TOP position may also be used
for crawling. When crawling with
the EAGLE IMAGER 320 Ther-
mal Camera in one hand, the
housing and the handle of the
camera will support the weight of
a three-hundred pound person.
See FIGURE 8.
2. In the MIDDLE position, the cam-
era display can be viewed at arms
length for rapid assessment of a
situation. See FIGURE 9.
3. In the LOW position, the camera
can be suspended form the Neck
Strap for hands-free viewing while
walking. The Neck Strap attaches
to the two D-Rings on the ends of
the strap handles on either side of
the camera. See FIGURE 10.
4. To lock the handle in any of the three positions, tighten the lock wheel by
turning it clockwise until it stops. DO NOT OVERTIGHTEN.
FIGURE 9
FIGURE 8
LOCK
WHEEL
FIGURE 10
NECK STRAP
ATTACHES
TO D-RINGS
ON EACH
SIDE
Commenti su questo manuale