Eagle 320 Manuale Utente Scaricare il pdf (Pagina 14)

Page 12 of 32P/N 595176-01 Rev. C 1/11

3. Verify that battery is fully charged. See BATTERY CHARGING section of

this instruction.

4. Thread the fully charged battery clockwise into the end of the handle. Turn

the battery until it stops and is fully seated in the end of the handle. See

FIGURE 7.

BATTERY INSTALLATION

A single specially designed battery is required for operation of the EAGLE

IMAGER 320 Thermal Camera. Install the battery as follows:

1. The battery is self-contained and threads into the end of the handle. If a

battery is already installed, remove by turning it counterclockwise.

2. Check the battery contacts in the end of the handle. They should be clean,

straight, and spring back when pressed gently. See FIGURE 6.

FIGURE 6

BATTERY

CONTACTS

IN HANDLE

5. Test the operation of the camera according to the USE OF CAMERA sec-

tion of this instruction.

FIGURE 7

BATTERY

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Nessun commento

Eagle 320 Manuale Utente Pagina 14