Eagle Skimmer Specifiche Scaricare il pdf (Pagina 9)

screws). For the two-piece bracket, use the #20 bit (for the #12

screws).

Position transducer mount on transom and mark mounting holes.

Side view shown at left and seen from above at right.

5. Attaching transducer to transom.

A. One-piece bracket: Remove the transducer from the bracket and

re-assemble it with the cable passing through the bracket over the

bolt as shown in the following figures.

For single frequency Skimmer, route cable over bolt and through

bracket. Side view shown at left and seen from above at right.

Both bracket types: Attach the transducer to the transom. Slide the

transducer up or down until it's aligned properly with the bottom of

Transom

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Nessun commento

Eagle Skimmer Specifiche Pagina 9